Outside Tap Installation in Rushden
With gardens behind Rushden's terraces and the newer estates alike, an outside tap earns its keep all summer. An outside tap is one of those things you don't think about until you haven't got one. Washing the car with a bucket, dragging a hose through the kitchen, filling the paddling pool from the bathroom tap — it's a hassle. Getting one fitted is a quick job that makes life easier all year round.
Every outdoor tap we fit gets a double-check valve, keeping any backflow well clear of the drinking supply. We tee off your internal cold supply, drill through the wall, and fit the tap with a double check valve (backflow prevention — it's a water regulations requirement). It's a tidy job that doesn't disrupt your day.
An outside tap saves trailing a hose through the house, handy across the town's gardens and allotments. Most Rushden properties suit an outside tap on the kitchen wall or garage side. For bigger gardens, we can run the pipe further to a tap on a boundary wall or outbuilding. We always fit an indoor isolation valve so you can shut off and drain the run before winter, plus pipe lagging where it crosses any unheated voids inside the property.
Northamptonshire winters aren't the harshest in the country, but cold snaps still catch out outside taps that haven't been properly drained down. Water sitting in the spout can freeze, expand, and split the brass body or the copper pipe behind the wall — usually first noticed when the next thaw produces a leak inside the kitchen wall. We always fit an isolation valve on the indoor side of the run so you can shut off and drain the supply before December, plus pipe lagging on the indoor run where it crosses unheated voids.
For larger Rushden gardens around Hayden or Higham Ferrers, we can run the supply further down the side of the property to put the tap closer to where it's actually needed — near a vegetable patch, greenhouse, or boundary wall. We can also fit a hose union connector on the spout so a garden hose clips on without an adaptor, and double-tap blocks for properties that want one tap for the hose and a separate one for filling watering cans.
