Outside Tap Installation in Fulbourn
Fulbourn takes its name from a stream once known for its waterfowl, and water still shapes the village — gardens here back onto fen and chalk alike. An outside tap is one of those things you don't think about until you haven't got one. Washing the car with a bucket, dragging a hose through the kitchen, filling the paddling pool from the bathroom tap — it's a hassle. Getting one fitted is a quick job that makes life easier all year round.
Gardens on the fen side of Fulbourn hold moisture; those rising toward the Gog Magogs drain fast off the chalk. It changes how much use a garden tap gets. Your plumber tees off your internal cold supply, drills through the wall, and fits the tap with a double check valve (backflow prevention — it's a water regulations requirement). It's a tidy job that doesn't disrupt your day.
Most outside taps in Fulbourn come off the kitchen supply, and the route that pipe takes decides how neat the finished job looks. Most Fulbourn properties suit an outside tap on the kitchen wall or garage side. For bigger gardens, we can run the pipe further to a tap on a boundary wall or outbuilding. An indoor isolation valve is always fitted so you can shut off and drain the run before winter, plus pipe lagging where it crosses any unheated voids inside the property.
The open ground north of the village gives frost a clear run at anything left unlagged over winter. Cambridgeshire winters aren't the harshest in the country, but cold snaps still catch out outside taps that haven't been properly drained down. Water sitting in the spout can freeze, expand, and split the brass body or the copper pipe behind the wall — usually first noticed when the next thaw produces a leak inside the kitchen wall. Your plumber always fits an isolation valve on the indoor side of the run so you can shut off and drain the supply before December, plus pipe lagging on the indoor run where it crosses unheated voids.
For larger Fulbourn gardens around Pierce Lane or Haggis Gap, we can run the supply further down the side of the property to put the tap closer to where it's actually needed — near a vegetable patch, greenhouse, or boundary wall. We can also fit a hose union connector on the spout so a garden hose clips on without an adaptor, and double-tap blocks for properties that want one tap for the hose and a separate one for filling watering cans.
