Outside Tap Installation in Bar Hill
Behind the tiles in many homes is the builder's original pipework, added to rather than renewed across the decades. An outside tap is one of those things you don't think about until you haven't got one. Washing the car with a bucket, dragging a hose through the kitchen, filling the paddling pool from the bathroom tap — it's a hassle. Getting one fitted is a quick job that makes life easier all year round.
With the big store and the A14 on the doorstep, there's a steady churn of lets and sales here where a reliable fix matters. Your plumber tees off your internal cold supply, drills through the wall, and fits the tap with a double check valve (backflow prevention — it's a water regulations requirement). It's a tidy job that doesn't disrupt your day.
Whether it's an original 1960s home or a modern infill, the same hard-water, planned-village pattern runs under Bar Hill. Most Bar Hill properties suit an outside tap on the kitchen wall or garage side. For bigger gardens, we can run the pipe further to a tap on a boundary wall or outbuilding. An indoor isolation valve is always fitted so you can shut off and drain the run before winter, plus pipe lagging where it crosses any unheated voids inside the property.
Bar Hill is a purpose-built village of the 1960s, laid out in closes inside a single ring road, so much of its housing shares one age and build. Cambridgeshire winters aren't the harshest in the country, but cold snaps still catch out outside taps that haven't been properly drained down. Water sitting in the spout can freeze, expand, and split the brass body or the copper pipe behind the wall — usually first noticed when the next thaw produces a leak inside the kitchen wall. Your plumber always fits an isolation valve on the indoor side of the run so you can shut off and drain the supply before December, plus pipe lagging on the indoor run where it crosses unheated voids.
This Cambridge-side supply is hard, and limescale in combis and shower valves is the complaint that comes round again and again here. For larger Bar Hill gardens around The Spinney or Hanover Close, we can run the supply further down the side of the property to put the tap closer to where it's actually needed — near a vegetable patch, greenhouse, or boundary wall. We can also fit a hose union connector on the spout so a garden hose clips on without an adaptor, and double-tap blocks for properties that want one tap for the hose and a separate one for filling watering cans.
